- ELECTRIC TRANSFORMER
- SWITCHGEAR
- PFI PLANT
- BUSBAR TRUNKING
- ATS & GIS PANLE
- RING MAIN UNIT
- ONLINE UPS
- GENERATOR
TPR6 HP PLUS for primary distribution systems has been developed after many years of experience in the secondary distribution with TPR6 series. Compared to TPR6, TPR6 HP PLUS is characterized by higher performances; its short-time withstand current is up to 31.5kA and rated current up to 2000A . TPR6 HP PLUS is particularly suitable for power plants with high performances.
- A wide range of products covering your present and future requirements.
- Modular cubicles adapted to future extensions.
- Possibility to mount auxiliary components under voltage.
- Options to anticipate the telecontrol.
- Small dimensions and reduced weights for easier handling and installation.
- During the testing cable operation it is not needed to break the earthing busbar system of the switchgear.
- All the control operations are carried out from the front by means of a simple devices.
- Up to 2000A 36kV
- Single and double Busbar system
TPR6 is a complete ring main unit range suitable for all the switching operations in 40,5kV, secondary distribution network. Operating safely in a distribution network requires different switching points to obtain maximum service continuity in case of fault on the network.
- A wide range of products covering your present and future requirements.
- Modular cubicles adapted to future extensions.
- Possibility to mount auxiliary components under voltage.
- Options to anticipate the telecontrol.
- Small dimensions and reduced weights for easier handling and installation.
- During the testing cable operation it is not needed to break the earthing busbar system of the switchgear.
- All the control operations are carried out from the front by means of a simple devices.
- Up to 2000A 36kV
- Single and double Busbar system
TPR6 is a complete ring main unit range suitable for all the switching operations in 7.2kV, 12kV, 17.5kV, 24kV, secondary distribution network. Operating safely in a distribution network requires different switching points to obtain maximum service continuity in case of fault on the network.
- A wide range of products covering your present and future requirements.
- Modular cubicles adapted to future extensions
- Small dimensions and reduced weights for easier handling and installation
- During the testing cable operation it is not needed to break the earthing busbar system of the switchgear.
- All the control operations are carried out from the front by means of a simple devices.
- Up to 24kv
- 200A – 630A
- MTBF = 5943 years.Up to 25kA 3s
- Indoor / Outdoor Versions